VAIC Signature, gebraucht, 1 Jahr Garantie

Lieferzeit 2 bis 5 Tage
aktuell 1 Stk. verfügbar.

UVP: 11000.00 €

3900.00 € inkl. 0.00 % MwSt., zzgl. Versand

VAIC Signature, gebraucht, 1 Jahr Garantie

UVP: 11000.00 €

Ihr Preis
3900.00 €

Preise inklusive 0 % MwSt.

zzgl. Versand

Lieferzeit 2 bis 5 Tage
aktuell 1 Stk. verfügbar.

Artikel-Nr.: LAU11368

VAIC Signature, gebraucht, 1 Jahr Garantie

Vaic Signature mit Hoch- und Mittelton Keramikchassis von Thiel (Accuton), Kevlar-Baßchassis von Eton (alles Made in Germany) 

Top-Referenz-Lautsprecherhersteller wie Avalon, Lumen White und Ayon verwenden ebenso Keramiklautsprecher von Accuton. 

Die Vaic Signature stammt auch vom Entwickler der berühmten Lumen White. 

Dieses Modell war der zweite Lautsprecher aus einer Reihe von Lautsprechern, die von Lumen White für VAIC hergestellt wurden, und vom Wirkungsgrad speziell für die Verwendung mit Triodenverstärkern entwickelt wurden.

Die Lautsprecher besitzen eine hochwertige Innenverkabelung vom namhaften Hersteller Synergistics.

Sehr hochwertige Verarbeitung, optisch und technisch im Top-Zustand. Der Lautsprecher ist sehr dynamisch, plastisch, luftig, agil und räumlich - auch bei leisen Lautstärken.
Durch den sehr hohen Wirkungsgrad (93 dB) sehr gut geeignet für Röhrenelektronik, aber Transistorverstärker spielen natürlich ebenfalls sehr gut. Empfohlene Verstärkerleistung 10-200 Watt. 

Kommt auch schon mit 2x10 Röhrenwatt sehr gut zurecht! War längere Zeit beim Chef zuhause im Einsatz, geht sehr gut mit 300B und 845er Röhren !

Neupreis 11000.- EUR/Paar. Seriennummern 1039a und 1039b

Impedanz 4 Ohm
Wirkungsgrad 93dB
Frequenzgang 35Hz-35kHz

Abmessungen: 26 x 40 x 110 cm.
Gewicht 38 kg/Stück

Mit Anschluß für Active Shielding

Sehr hochwertiges Terminal mit fetten Klemmen für Kabelschuhe, die guten Bananas gehen natürlich auch. Sehr hochwertige interne Verkabelung von Synergistic.
2way absorber vent system, 1" Ceramic Tweeter, 7" Ceramic Midrange and 7" Nomex Kevlar Woofer 

Guter bis sehr guter allgemeiner Zustand, technisch 1A, optisch mit einigen Spuren am Gehäuse, besonders an einem Lautsprecher sind auf der rechten Seite Druckspuren, die aber optisch kaum auffallen. Die schwarze, gebürstete eloxierung der Alu-Fläche ist auch nicht mehr überall perfekt. Das war es aber auch schon, ab 20cm Entfernung merkt es keiner.

Wir haben den guten Lautsprechern noch einen Satz bFly-Audio Talis Pro Füße M8 spendiert.

Paarpreis, 1 Jahr Garantie 


Hier noch ein paar Informationen in englisch zu VAIC und dem Übergang zu Ayon Audio:

In 1994 we began to make our first tube amplifier in Italy under the brand name “ Vaic”, it called Vaic 52B monoblock and was a single-ended triode power amp and with this amplifier our career starts up internationally. 1996, we got for this amp a 5-star review from Harry Pearson “Absolute Sound”. 

Power tubes were made by Alesa Vaic in Prague at that time and he was only responsible for tubes and was not engaged with our amplifiers although we used his name. “Vaic” is still our brand name but we don’t use up this name any more.

1998 Alesa Vaic stopped tube production. 1999 we merged “Vaic” to Ayon Audio and in the same year we took over a part of the old Alesa Vaic tube factory and renew many things there and involved add the former Tesla chief tube engineer. Since 2000 we are producing our own Ayon single-ended triode power tubes in Prague. We can say that the Ayon tube quality nowadays is perhaps one of the best in the world, over more then10 years we optimized everything and made it perfect, for an example we are using “laboratory” glass the highest glass standard, gold wire for filament, special zirconium coating for anode plate and special welding progress to keep highest precision which is extremely important for high power SE-triode tubes.

During we merged the brand name to Ayon we also moved from Italy back to Austria, because our Italian manufacturer was on the limit with their skill and expertise and we felt we have to go a new way with much more power and engineering in the background. 

We had to turn around totally to make the next big step ahead to bring Ayon quickly forward and increased our engineer team rapidly. With this important step ahead, I had a vision in my mind to bring Ayon close to the top of the top tube manufacturer companies. 

We start up to design a new generation of amplifiers with Aluminium chassis which produce a much better sound performance as stainless steel chassis and combined with new circuit and output transformer design.

2001 we exhibited at the CES with the Ayon Reference 52B monoblock and Lumen White Loudspeaker; we got best sound of the Show by the most important top High-End magazines around the world.


Frage zum Produkt

Du hast eine Frage? Wir antworten gerne.